Custom packaging ·3-5 day sampling - Global delivery support
PE Pallet Cover Bag for Dust and Moisture Protection, Open Base
PE Pallet Cover Bag for Dust and Moisture Protection, Open Base
PE Pallet Cover Bag for Dust and Moisture Protection, Open Base
PE Pallet Cover Bag for Dust and Moisture Protection, Open Base
PE Pallet Cover Bag for Dust and Moisture Protection, Open Base
PE Pallet Cover Bag for Dust and Moisture Protection, Open Base
PE Pallet Cover Bag for Dust and Moisture Protection, Open Base
PE Pallet Cover Bag for Dust and Moisture Protection, Open Base
PE Pallet Cover Bag for Dust and Moisture Protection, Open Base

PE Pallet Cover Bag for Dust and Moisture Protection, Open Base

Dust, splash and condensation do most of the damage to palletised goods long before anyone loads them. This cover is a plain PE bag cut to the pallet footprint, open at the bottom and closed at the top, so a stack can be slipped in and closed in a minute without wrapping film. The film is a single LDPE or HDPE layer from 0.03 to 0.15 millimetres, clear or white, with an optional gusset so the cover squares off over the load instead of pulling tight across the corners. It is a barrier against dirt and water, not an insulator: it keeps the pallet clean, keeps a shower off it, and costs a fraction of a thermal cover on a load that never needed one.

Color

Size

  • S (1200 x 800 x 1000 mm)
  • M (1200 x 800 x 1400 mm)
  • L (1200 x 1000 x 1200 mm)
  • L+ (1200 x 1000 x 1600 mm)
  • XL (1200 x 1200 x 1400 mm)
  • XXL (1200 x 1200 x 1800 mm)
  • Custom Size Available

Shipping

Express (DHL/FedEx/UPS), Sea Freight, Air Freight

Payment Terms

T/T (Bank Transfer), L/C at Sight, PayPal, Western Union, Alibaba Trade Assurance

Lead Time

Samples: 3-5 working days | Mass Production: 15-25 working days

Samples

Contact us for FREE samples

Cover Format

Open base, closed top, optional gusset

Film Option

LDPE or HDPE, clear or white, 0.03-0.15 mm

Closure

Fold-over top with tape, tie or elastic hem; open top available

Customization

Footprint / height / thickness / colour / print / gusset
Contact Us WhatsApp

Product Description

Where a Film Cover Helps, and Where It Stops

One film, cut and seamed. LDPE gives a soft, stretchy cover that takes a fold without creasing white; HDPE gives a stiffer film with better see-through and a crisper edge for machine handling. Thickness runs from 0.03 mm for a single-trip dust cover to 0.15 mm for a heavier cover that goes back on the pallet a few times. Clear film lets a scanner read the carton label without opening; white film hides the load and takes print better.

The cut decides whether it fits. A flat bag pulled over a stack tents at the corners and leaves the base edge short; a gusseted cover squares off, so the skirt reaches the deck on all four sides and the top sits flat. Standard covers are made to the two footprints the trade uses, 1200 by 1000 and 1200 by 800 millimetres, with heights from 1000 to 1800 and a base opening wide enough to clear the pallet deck boards.

Closure is deliberately simple: the cover folds over the top and is closed with tape, a tie, or an elastic hem, or left open where the load is going straight into a container. Nothing here is welded shut, because a cover that has to be cut off is a cover nobody reuses. Where the pallet has to stay airtight for a sea leg, the answer is a sealed hood, not this bag.

What it does not do is hold temperature. A single film has no core, so it slows nothing worth measuring on a warm dock; put it over a chilled load and it will trap condensation instead of keeping the cold in. It is the right cover for dry goods, cartons, machinery and bagged material, and the wrong one for anything that depends on a temperature band.

Specifications

One Table to Quote From: Film, Cut and Closure
Parameter Specification
Film Single layer LDPE or HDPE, no core, no lamination
Thickness 0.03 mm single-trip to 0.15 mm reusable
Appearance Clear for label reading, or white for opacity and print
Construction Open base, closed top, gusset on request
Closure Fold-over with tape, tie or elastic hem
Base Open; skirt clears the pallet deck boards
Water behaviour Sheds rain and splash; open base and seams are not watertight
Thermal None claimed; a single film has no core
Printing Flexo, 1-4 spot colours, outside face
Origin Guangdong, China

Printing Process

Print That Has to Survive a Wet Dock and a Soft Film
PEPalletCover (5)

Print on a PE cover is read in a warehouse, at a distance, under bad light, which sets the artwork: a bold block on one side, a repeat mark on the other, and nothing that needs to be read close up. Buyers use it to mark a customer, a destination or a handling instruction, so one large element beats a fine layout that will not hold on a soft film.

Flexo is the usual process, one to four spot colours on the film, printed on the outside face where it will be seen. Registration on a soft web moves, so type is kept off the seam and away from the fold that runs over the top of the load. Where the print has to survive a wet dock, the ink is specified for the film rather than a general-purpose grade.

The awkward part is the corner. A printed panel that looks square on the reel will distort once the cover is pulled over a stack, because the film stretches at the corners and not along the flats. Artwork is drawn with that stretch in mind, and a logo placed near a corner is moved inward before the plate is cut, not after the first pallet comes back wrong.

Proofing runs on the production film, at the production thickness, because a 0.03 mm film prints differently from a 0.15 mm one. We send a printed sample cover for the buyer to pull over a real pallet, which is the only test that shows whether the skirt length and the print position both work at once. It also settles the argument about who chose the film.

Lining Decoration

One Film, and What It Will Not Do
PEPalletCover Lining 1 SingleFilm

Single PE Film

One LDPE or HDPE layer, 0.03 to 0.15 mm. No core.
PEPalletCover Lining 2 GussetFold

Gusset Fold

Side gussets square the cover over the load.
PEPalletCover Lining 3 OnThePallet

On the Pallet

Drop it over the stack; the skirt reaches the deck.

No lining, one film. The cover is a single PE layer, clear or white, cut with an optional gusset so it squares over the load, open at the base and closed over the top.

The failure it prevents is ordinary: dust from a yard, splash from a wet dock, condensation dripping from a roof, and the scuffing that comes from a pallet being dragged past something. What it cannot do is insulate, so it belongs on dry goods, not on a chilled load.

Get In Touch With Us

Reach out for any inquiries, support, or to discuss how we can meet your industrial needs.
  • Address

    North Side Of Nanyi Road, Shiwan Town Science And Technology Park (10th Floor, Building 1, No. 13)

Contact Me

    You can upload a PDF or an image(max 5MB)

    INQUIRY