Custom packaging ·3-5 day sampling - Global delivery support
Reusable Ice Bag with Wide Screw Spout and Slide Closure
Reusable Ice Bag with Wide Screw Spout and Slide Closure
Reusable Ice Bag with Wide Screw Spout and Slide Closure
Reusable Ice Bag with Wide Screw Spout and Slide Closure
Reusable Ice Bag with Wide Screw Spout and Slide Closure
Reusable Ice Bag with Wide Screw Spout and Slide Closure

Reusable Ice Bag with Wide Screw Spout and Slide Closure

A bag of ice in a cooler is mostly water by lunchtime, and the cooler ends up as a puddle around the bottles. This bag holds the melt instead. Fill it to the printed line through the corner spout, freeze it flat, and it becomes one solid block that goes into the cooler on top of the drinks and gives up its cold slowly. Nothing leaks out to soak the labels. When the block has done its work the bag is still intact, so the water is emptied through the corner spout, the bag is rinsed, and it goes back into the freezer for the next trip.

Color

Size

  • S (2.5 LB / about 5 cups)
  • M (5 LB / about 10 cups)
  • L (10 LB / about 20 cups)
  • Custom Size Available

Shipping

Express (DHL/FedEx/UPS), Sea Freight, Air Freight

Payment Terms

T/T (Bank Transfer), L/C at Sight, PayPal, Western Union, Alibaba Trade Assurance

Lead Time

Samples: 3-5 working days | Mass Production: 15-25 working days

Samples

Contact us for FREE samples

Closure

Slide bar over a folded top; press-to-close rib version

Spout

Wide screw cap on a welded neck, corner position

Handle

Clip-on rigid handle, or none
Contact Us WhatsApp

Product Description

Fill it, freeze it, load it.

The bag is made to be frozen, not just carried. Water goes in to the printed line, the top is closed, and the whole thing lies flat in a freezer until it is one block that will not slop about. That block then sits in a cooler on top of the bottles and cans and does the cooling itself. Because nothing drains away while it works, the cooler stays dry and the labels stay readable. At the end the bag is emptied, rinsed and frozen again.

Four things keep that water where it is. The perimeter is welded rather than glued. The top edge folds over on itself, so the film is doubled exactly where a bar grips it. A rigid slide bar then runs across that fold until it stops, which closes the bag evenly without rolling it by hand; the press-to-close rib version does the same job with two profiles and a thumb.

The spout is how the bag gets filled, and that is the main reason it is on the bag at all. Its neck is moulded with a flange and welded straight through the wall in the corner, so there is no separate fitting screwed into a hole. Cap off, hold it under the tap, fill to the printed line, cap on: the top is never opened, and the same corner empties the melt before the next freeze. The scale on the face is read from outside.

Two versions share the same body: with a clip-on rigid handle for carrying a full bag, and without one for packing flat into a cooler. Both take a print on the front – ours carries a light line design and a cup scale, and it can be replaced with your artwork. The bag is not microwave safe and does not want to meet anything sharp, which is printed on it in as many words.

ReusableIceBag Marketing 1 Kitchen

Specifications

What the bag is made of.
Parameter Specification
Format Flat pouch, top-loading, corner spout
Film Food-safe, BPA-free, printed on the face
Seams Heat-welded, perimeter and spout flange
Closure Slide bar over folded top; rib version available
Spout Wide screw cap, moulded neck with flange
Handle Clip-on rigid handle, or none
Capacity 2.5 LB / 5 LB / 10 LB
Scale Cup marks printed on the face
Print 1–3 colours, customer artwork
Reuse Rinse, dry, re-freeze
Packing Flat-packed, counted per carton
Customization Capacity, closure type, handle, spout, print

Printing Process

Print that survives the freezer
ice pack

The front of this bag is read at arm’s length in bad light, usually while someone is kneeling over an open cooler, so the artwork has to survive being looked at quickly. Line work and a scale beat a photograph every time: the scale has to stay legible after twenty freeze cycles, and a dense image turns into a dark smear once the bag is full of water.

Printing runs on the film before it is made up. Ink is laid on the outer face and cured at a temperature the film tolerates, because a printed web that stretches during welding will take the register with it. The scale sits close to the top edge, which is the area the fold and the bar will work hardest, so the plate leaves a clear margin there rather than printing into the joint.

Registration is set against the weld, not against the sheet. Position is checked after the perimeter is sealed, after the spout is welded in and after the top is folded, because each of those steps moves the film a little. A design that reads perfectly on the flat web and drifts two millimetres on the finished bag is a design that has to be re-plated.

Colour is the other half of the job. Blue on white is unforgiving: a half-shade difference between two print runs is visible side by side on a shelf, so the ink is matched to a retained standard and checked on the made-up bag, filled with water, under daylight rather than under the press lights. Two runs of the same blue are put side by side before either is packed, because that is how the buyer will see them.

Lining Decoration

Where the water stays
ReusableIceBag Lining 1 MaterialStructure

Material Structure

Printed food-safe film, welded seams, welded spout
ReusableIceBag Lining 2 BagMouth

Bag Mouth

Fold the top, then slide the bar home (or press the rib)
ReusableIceBag Lining 3 InsideBag

Inside The Bag

Fill through the corner spout, freeze flat, load it

The body is printed food-safe film, welded on every edge; the front carries a light line design and a cup scale so the fill reads from outside. The top edge folds over on itself before a rigid slide bar runs across it and stops, doubling the film exactly where the grip is; a press-to-close rib version shares the same body. The wide screw spout in the corner is the fill point: cap off, water in to the line, cap on. A clip-on handle can be added or left off.

Get In Touch With Us

Reach out for any inquiries, support, or to discuss how we can meet your industrial needs.
  • Address

    North Side Of Nanyi Road, Shiwan Town Science And Technology Park (10th Floor, Building 1, No. 13)

Contact Me

    You can upload a PDF or an image(max 5MB)

    INQUIRY