Custom packaging ·3-5 day sampling - Global delivery support
Self-Absorbing Gel Ice Pack for Cold Chain Food Delivery
Self-Absorbing Gel Ice Pack for Cold Chain Food Delivery
Self-Absorbing Gel Ice Pack for Cold Chain Food Delivery
Self-Absorbing Gel Ice Pack for Cold Chain Food Delivery
Self-Absorbing Gel Ice Pack for Cold Chain Food Delivery
Self-Absorbing Gel Ice Pack for Cold Chain Food Delivery

Self-Absorbing Gel Ice Pack for Cold Chain Food Delivery

A dry ice pack is mostly air until somebody adds water. This one is a flat sachet of super-absorbent powder: soak it for three to five minutes, dry the surface, freeze it for six hours, and it turns into a solid gel block that holds cold through a delivery run. Because it ships dry, a carton weighs a fraction of what it would with the water already in it – the customer adds the water at their end. Single packs run from 100 to 500 ml; the same pocket repeats six, twelve or twenty-four times across a sheet, each cell 7 x 7 cm and 40 ml, for trays and boxes that need the cold spread evenly rather than in one corner.

Color

Size

  • Single grid ice pack:S (100 ml)
  • Single grid ice pack:M (180 ml)
  • Single grid ice pack:L (250 ml)
  • Single grid ice pack:XL (400 ml)
  • Single grid ice pack:XXL (500 ml)
  • Multi grid ice pack:6 cells (7 x 7 cm each, 40 ml per cell)
  • Multi grid ice pack:12 cells (7 x 7 cm each, 40 ml per cell)
  • Multi grid ice pack:24 cells (7 x 7 cm each, 40 ml per cell)
  • Custom Size Available

Shipping

Express (DHL/FedEx/UPS), Sea Freight, Air Freight

Payment Terms

T/T (Bank Transfer), L/C at Sight, PayPal, Western Union, Alibaba Trade Assurance

Lead Time

Samples: 3-5 working days | Mass Production: 15-25 working days

Samples

Contact us for FREE samples

Format

Flat sachet, four-side heat seal; single pack or multi-cell sheet
Contact Us WhatsApp

Product Description

DRY TO SHIP, GEL TO USE

Shipping water is expensive, so this pack ships dry. It leaves the factory as a flat sachet holding a few grams of super-absorbent powder, and the water goes in at the other end: soak for three to five minutes, shake off the surface, freeze for six hours. What arrives in the box is a solid gel block instead of a bag of liquid, which is why a carton costs a fraction of its wet equivalent to move.

Three faces are offered, and they differ only in where the water enters. The single-face pack puts non-woven on one side and film on the other, so it wets from one face. The double-side build bonds non-woven onto the film, giving a softer face with the same one-way fill. The pierced build keeps film on both sides and perforates it all over, so the pack wets from either side – the one to use when packs are stacked.

The sheet is that same pocket repeated: six, twelve or twenty-four cells at 7 x 7 cm, each holding 40 ml. Every cell is sealed on its own, so a cell that splits does not drain its neighbours, and a sheet can be cut down to the number a box needs. Across a tray of seafood or a crate of fruit, that spreads cold over the whole base instead of putting it all in one corner.

Use is deliberately plain. Soak, dry, freeze, place. No tap, no activator, no plastic clip to lose. The gel stays where it is put and does not slosh, so a pack laid on its side stays on its side, and the same pack can be re-frozen and used again until the film is punctured. The instruction panel is printed with the pack, in whatever language the market needs.

Self-Absorbing Gel Ice Pack 4

Specifications

Specifications
Parameter Specification
Format Flat four-side sealed sachet; single pack or multi-cell sheet
Single pack 100 / 180 / 250 / 400 / 500 ml
Sheet 6 / 12 / 24 cells, 7 x 7 cm each, 40 ml per cell
Core Super-absorbent polymer powder
Face: single PE film one side, non-woven the other
Face: double side PE film one side, film bonded to non-woven the other
Face: both faces pierced PE film both sides, needle-perforated
Seal Heat seal on four sides; fill gap closed after dosing
Usage Soak 3-5 minutes, dry the surface, freeze 6 hours before use
Print Up to 6 colours, instruction panel included
Colour Printed to artwork; blue and white stock design available
Packing Flat and dry, carton count set per size
Customization Size, cell count, face style, print, carton

Printing Process

PRINT THE FACE, DOSE THE CORE
Self-Absorbing Gel Ice Pack 1

Printing runs on the film face, not on the non-woven. Film takes ink by adhesion, so the artwork is set to the film web and the non-woven is laminated afterwards; that keeps the small instruction type sharp, which matters because this is a pack people have to read before they use it.

Dosing is the part that decides whether the pack works. Powder is metered by weight into each pocket, and the dose is set against the water that pocket will take, not against its volume: too little and the gel stays loose, too much and the seal is pushed out when it swells. Dosing rooms run dry and cool, because the powder pulls moisture straight out of the air. A dose set by eye instead of by scale is the most common reason a batch comes back.

Sealing comes after dosing. Four edges close on a heated tool, and on a sheet the same tool runs the channels between cells, so every pocket is finished in one pass. Seal strength is set against the swollen gel rather than the flat pack, since the load on the seam only appears after the water goes in. A channel that is too narrow leaves a cell that will not fill; too wide and the sheet wastes film and powder.

Every batch is checked three ways: weight per pocket, a leak test along the seal, and a soak test where a sample is left in water and watched through a full swell. A pack that weeps at the corner shows up in the soak test and not on the line, which is why the test is run on every batch. Cartons leave flat and dry, with the dosing record inside.

Lining Decoration

WHERE THE WATER ENTERS
IcePack Lining 1 MaterialStructure

Material Structure

Three faces, one core: film, non-woven, perforated
IcePack Lining 2 BagMouth

Bag Mouth

Four-side seal per pack; each cell sealed on its own
IcePack Lining 3 InsideBag

Inside The Bag

Dry powder, soaked gel, frozen block: three states

Inside the pack is a sealed pocket of super-absorbent polymer held between a PE film face and a non-woven face. The film keeps the powder dry on the shelf; the non-woven lets water through in three to five minutes, and the gel that forms stays locked in the pocket instead of running. Four heat-sealed edges close it, and on a multi-cell sheet the same seal divides the pack into 7 x 7 cm cells, so a cell that splits does not affect its neighbours.

Get In Touch With Us

Reach out for any inquiries, support, or to discuss how we can meet your industrial needs.
  • Address

    North Side Of Nanyi Road, Shiwan Town Science And Technology Park (10th Floor, Building 1, No. 13)

Contact Me

    You can upload a PDF or an image(max 5MB)

    INQUIRY