Custom packaging ·3-5 day sampling - Global delivery support
Aluminium Foil Wine Bottle Cooler Pouch with Die-Cut Carry Handle
Aluminium Foil Wine Bottle Cooler Pouch with Die-Cut Carry Handle
Aluminium Foil Wine Bottle Cooler Pouch with Die-Cut Carry Handle
Aluminium Foil Wine Bottle Cooler Pouch with Die-Cut Carry Handle
Aluminium Foil Wine Bottle Cooler Pouch with Die-Cut Carry Handle
Aluminium Foil Wine Bottle Cooler Pouch with Die-Cut Carry Handle

Aluminium Foil Wine Bottle Cooler Pouch with Die-Cut Carry Handle

A bottle is the one load a flat pouch cannot take on its own: it is heavy, it is round, and once it is cold it sweats, so the bag has to carry it rather than the hand. This one is a foil pouch cut to a bottle’s own outline, narrow and tall, with a base that opens under the glass and a grip punched through the head, so a full 750 ml bottle hangs from the seal line instead of from the neck. A bottle straight from the fridge keeps its chill for four to six hours, enough for a delivery round or a dinner service, and it is bought by restaurants, wine shops and hotels that hand a bottle over as a gift.

Color

Size

  • S (10 × 26 cm)
  • M (11 × 31 cm)
  • L (13 × 38 cm)
  • XL (15 × 38 cm)
  • XXL (18 × 43 cm)
  • Custom Size Available

Shipping

Express (DHL/FedEx/UPS), Sea Freight, Air Freight

Payment Terms

T/T (Bank Transfer), L/C at Sight, PayPal, Western Union, Alibaba Trade Assurance

Lead Time

Samples: 3-5 working days | Mass Production: 15-25 working days

Samples

Contact us for FREE samples

Format

Flat bottle pouch, bottom gusset, welded head band with die-cut grip
Contact Us WhatsApp

Product Description

A Grip the Bottle Does Not Have to Be Carried By

A bottle is the one load a flat pouch cannot take on its own. It is heavy, it is round, and once it is cold it sweats, so the hand that holds it is holding a wet cylinder with a hard edge. This pouch is cut to the bottle’s outline instead – narrow, tall, with a base that opens under the glass – so the bag carries the bottle and the hand only carries the bag.

The head is where the engineering sits. The band is the same wall folded and welded to double thickness before the oval is punched, because a single ply taking 1.3 kg of glass at one cut edge will tear there first. Both ends of the oval are radiused for the same reason: a square corner concentrates load. The band also lets the artwork run to the top edge, because the punch is registered to the print.

The body stays flat. There is no side gusset, so the bag takes the bottle’s width and no more, which is what makes it cheap to ship collapsed and easy to stack behind a bar. The floor is a gusset rather than a seam, so the weight goes through the glass into the table and the film only has to hold the bottle, not support it.

Ambient heat is what decides the figure. Foil reflects and the closed-cell core slows the transfer, but a bag left in a car in summer will not hold what one carried through a cellar door will – true of every sleeve this thin. A longer hold needs an ice pack or a heavier core, and both fit the same structure without changing the artwork.

Aluminium Foil Wine Bottle Cooler Pouch 6

Specifications

Face, Gusset and Grip in One Table
Parameter Specification
Format Flat bottle pouch, bottom gusset, no side gusset
Face sizes 10×26 to 18×43 cm, plus custom
Bottle fit 187 ml split, 375 ml half, 750 ml Bordeaux / Burgundy, 1.5 L magnum
Base gusset 4-6 cm, set to the bottle base on request
Head band Welded double thickness, 8-10 cm, punched oval grip
Outer face Aluminium foil laminate, full-colour print
Core Closed-cell EPE foam, 2-5 mm (air bubble on request)
Contact layer Food-grade PE sealant
Closure Press-to-close rib seal under the head band; slider or heat seal on request
Insulation 4-6 hours for a chilled bottle at room temperature
Grip Die-cut oval, both ends radiused, punch registered to print
Print coverage Front and back panels
Colour Custom Pantone; unprinted silver foil available
Customization Structure, size, gusset, core, print, colour, grip shape

Printing Process

Print That Has to Miss the Punch
InsulatedPouch PrintSheet 1

A bottle pouch is printed flat, punched after, and the two steps compete for the same few centimetres at the head. The artwork is drawn with the seal band, the punch oval and the tear notch all marked on it, because a punch that lands two millimetres off centre reads as a crooked handle, and a punch that lands in a heavy ink field takes the ink with it and leaves a white ring around the grip.

The ink itself is surface work on metal. Foil does not absorb, so every colour is held by an adhesion layer; a photographic wine label holds only if the white underneath is printed rather than left as bare sheet. Registration is checked at the punch and at the bottom gusset fold before a run is approved, because those are the two places where a printed bottle sleeve fails visibly – one at the handle, one at the base.

The punch tool is built with the artwork, not after it. The oval, the tear notch and the hang-hole, if there is one, sit in one die, and the die is registered to the print repeat; a change of face width moves the repeat and the die with it. That is why size and print are quoted together on this product and never one after the other.

Proofs are pulled on the foil the job will run on. A design proofed on white paper can read perfectly and then go dull once the same ink sits on metal, and a wine red is the colour that shifts most, because it is the one customers compare against a bottle’s own label. The layout drawing is returned for approval before any cylinder is cut.

Lining Decoration

Where the Load Hangs
WineBottlePouch Lining 1 MaterialStructure

Material Structure

Foil, EPE core, PE sealant - one welded wall
WineBottlePouch Lining 2 BagMouth

Bag Mouth

Grip punched through a welded double head
WineBottlePouch Lining 3 InsideBag

Inside The Bag

Rib under the band, bottle on the base gusset

Printed foil outside, closed-cell EPE core, food-grade PE sealant inside: the same three-ply wall as the rest of the range. The head is that wall welded to double thickness and then punched, so the grip takes the load on the weld rather than on a handle glued to the face. A gusset is folded into the base so a bottle stands on its own base, and the sides stay flat.

Get In Touch With Us

Reach out for any inquiries, support, or to discuss how we can meet your industrial needs.
  • Address

    North Side Of Nanyi Road, Shiwan Town Science And Technology Park (10th Floor, Building 1, No. 13)

Contact Me

    You can upload a PDF or an image(max 5MB)

    INQUIRY