Custom packaging ·3-5 day sampling - Global delivery support
Clear PVC Gel Wine Bottle Cooler Bag with Hexagonal Cells
Clear PVC Gel Wine Bottle Cooler Bag with Hexagonal Cells
Clear PVC Gel Wine Bottle Cooler Bag with Hexagonal Cells
Clear PVC Gel Wine Bottle Cooler Bag with Hexagonal Cells
Clear PVC Gel Wine Bottle Cooler Bag with Hexagonal Cells
Clear PVC Gel Wine Bottle Cooler Bag with Hexagonal Cells

Clear PVC Gel Wine Bottle Cooler Bag with Hexagonal Cells

Wine arrives at the table too warm more often than it arrives broken, and a bottle sleeve that only cushions does nothing about temperature. This one is a clear PVC bag with a panel of hexagonal gel cells welded into the front. Freeze it flat, drop a bottle in at the open top, and the panel sits against the glass and takes the heat out of it. Because the gel is sealed into the bag, there is no separate pack to hunt for in a freezer and nothing loose to slide around. The front film doubles as a printed header, and two clear PVC tubes carry it. Rinse it, lay it flat, freeze it again.

Color

Size

  • S (90 × 230 mm)
  • M (100 × 250 mm)
  • L (110 × 290 mm)
  • Custom Size Available

Shipping

Express (DHL/FedEx/UPS), Sea Freight, Air Freight

Payment Terms

T/T (Bank Transfer), L/C at Sight, PayPal, Western Union, Alibaba Trade Assurance

Lead Time

Samples: 3-5 working days | Mass Production: 15-25 working days

Samples

Contact us for FREE samples

Format

Flat sleeve with side gusset, open top, welded base

Gel

Food-grade gel sealed in hexagonal cells, front panel
Contact Us WhatsApp

Product Description

PVC Gel Wine Cooler Bag with Hexagonal Gel Cells

The body is one sleeve of clear PVC with a folded side gusset and a welded base, so it stands once a bottle is in it and lies flat when it is empty. Nothing is laminated onto the film: the wall stays clear, the label on the bottle stays readable, and the bag can be rinsed without a backing layer lifting at the edges.

What makes it a cooler rather than a sleeve is the front panel. It is a grid of hexagonal cells, each filled with food-grade gel and sealed between two layers of PVC. Hexagons are used because they leave less seam and more gel in the same area than a square grid does. The panel is welded to the bag as one piece, which is why there is no separate ice pack to lose, and why the gel sits exactly where the bottle is instead of sliding to one end.

The top is left open. A bottle drops in, stands on the welded base and shows its neck above the film. The front film widens into a header at the top, and the header is the print area – your logo, one or two colours, front only. Two clear PVC tubes pass through punched holes in that header and are welded back into it, so the handles hang on film. There is no eyelet, no rivet and no metal anywhere in the bag.

Sizes follow the bottle. The standard body is 100 mm wide by 250 mm high, which takes a 750 ml bottle with the neck clear; longer bodies are cut for magnums and for two-bottle orders. Empty, the bag goes flat into a freezer, gel side up, and that flat shape is also why a case of them costs little to ship.

GelCellWineBag Scene 2 Table

Specifications

Specifications
Parameter Specification
Format Flat sleeve, side gusset, open top, welded base
Body Clear PVC film, gauge by order
Gel panel Hexagonal cells, food-grade gel, sealed between two PVC layers
Panel position Front only, welded as one piece
Header Front film extended, welded rim, print area 1-2 colours
Handles Two clear PVC tubes, welded through punched holes
Size 100 × 250 mm body (750 ml); S / M / L and custom
Colour Gel dyed blue, green, orange, red, yellow, purple, black, clear
Print Logo on the header, front only, one or two colours
Packing Flat-packed, counted per carton
Customization Size, film gauge, gel colour, cell size, print

Printing Process

Printing on a Clear Film
P_002

Print has one job here, and it is not decoration: it has to sit on a transparent film without turning the bag opaque. On this product the printed area is the header at the top, so the film over the bottle and over the gel stays clear and the whole point of the panel stays visible. Anything that covers the body – a solid block, a photograph, a full wrap – turns a cooler back into a bag.

The film is printed in one or two colours, then welded. Screen printing suits PVC at this gauge: the ink sits on the surface, cures without heat distortion and holds on a film that slides under a press. Registration is set against the welded rim rather than against the gel colour, because the gel is dyed after the panel is filled and will never line up with printed geometry to the millimetre.

Welding is where a printed bag fails. The header’s lower edge is welded to the body and the punched holes sit within a few millimetres of the artwork, so the plate carries a clear margin along the weld line and around every hole. Heat that reaches dry ink will craze it or lift it, and a crazed header cannot be repaired, only reprinted.

Nothing is signed off on a flat sheet here. The header is checked on the assembled bag: after welding, after the holes are punched, after the tubes are set, first in daylight and then beside a bottle of red, because that is the light a buyer judges it in. What has to hold is a mark that still reads at arm’s length with condensation sitting on the film.

Lining Decoration

Decoration
GelCellWineBag Lining 1 MaterialStructure

Material Structure

Clear PVC sleeve, welded; gel sealed in a cell panel
GelCellWineBag Lining 2 BagMouth

Bag Mouth

Open top, printed header, tube handles welded through
GelCellWineBag Lining 3 InsideBag

Inside The Bag

Hex cells against the bottle; freeze flat to charge

The body is a clear PVC sleeve with a folded side gusset and a welded base, open at the top. The front carries a panel of hexagonal gel cells, food-grade gel sealed between two layers of PVC and welded to the bag as one piece. The front film extends above the mouth into a printed header, and two clear PVC tubes pass through punched holes there, each end melted back into the band. No metal, no stitching, nothing to rust in a freezer.

Get In Touch With Us

Reach out for any inquiries, support, or to discuss how we can meet your industrial needs.
  • Address

    North Side Of Nanyi Road, Shiwan Town Science And Technology Park (10th Floor, Building 1, No. 13)

Contact Me

    You can upload a PDF or an image(max 5MB)

    INQUIRY